|
Model |
GL-R32H |
|
Beam axis spacing/Lens diameter |
20 mm / ø5 0.79" / ø0.20" |
|
Detection capability |
ø0.98" ø25 mm |
|
Detecting distance |
0.66 to 49.21'Â 0.2 to 15 m*1 |
|
Effective aperture angle |
Max. ±2.5° (When operating distance is 9.84' 3 m or more) |
|
Light source |
Infrared LED (870 nm) |
|
Response time (OSSD) (ms) |
Wire synchronization, One-line or
Optical synchronization system (Channel 0) |
ON?OFF |
7.9 |
|
OFF?ON |
50.6*2 |
|
All blocked?ON |
68.3*3 |
|
Optical synchronization system
(Channel A or B) |
ON?OFF |
10.9 |
|
OFF?ON |
55.1*2 |
|
All blocked?ON |
80.2*3 |
|
Detection mode |
Turns on when no interruptions are present in the detection zone |
|
Synchronization between the transmitter and receiver |
Optical synchronization or Wire synchronization (Determined by wiring) |
|
Light interference prevention function |
Prevents mutual interference in up to two GL-R systems.
Optical synchronization: prevented by Channel A and B with setting switch
Wire synchronization: prevented automatically |
|
Control output
(OSSD output) |
Output |
2 transistor outputs. (PNP or NPN is determined by the cable type) |
|
Max. load current |
500 mA*4 |
|
Residual voltage (during ON) |
Max. 2.5 V (with a cable length of 16.40' 5 m ) |
|
OFF state voltage |
Max. 2.0 V (with a cable length of 16.40' 5 m ) |
|
Leakage current |
Max. 200 µA |
|
Max. capacitive load |
2.2 µF |
|
Load wiring resistance |
Max. 2.5 O |
|
Supplemental output
(Non-safety-related output) |
AUX |
transistor outputs. (PNP or NPN is determined by the cable type)
Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m ) |
|
Error output |
|
Muting lamp output |
Incandescent lamp (24 VDC, 1 to 5.5 W)
LED lamp (load current: 10 to 230 mA) can be connected. |
|
External input |
When using a PNP output cable |
EDM input
Wait input
Reset input
Muting input 1, 2
Override input |
ON voltage: 10 to 30 V
OFF voltage: Open or 0 to 3 V
Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only) |
|
When using an NPN output cable |
ON voltage: 0 to 3 V
OFF voltage: Open or 10 V or more
Up to the power voltage
Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only) |
|
Power supply |
Current
consumption
(Max.) (mA) |
Transmitter |
61 |
|
Receiver |
74 |
|
Protection circuit |
Reverse current protection, short-circuit protection for each output, surge protection for each output |
|
Approved standards |
EMC |
EMS |
IEC61496-1, EN61496-1, UL61496-1 |
|
EMI |
EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA |
|
Safety |
IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD)
IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3)
EN ISO13849-1:2008 (Category 4, PLe)
UL508
UL1998 |
|
Rating |
Power voltage |
24 VDC ±20%, ripple (P-P) 10% or less, Class 2 |
|
Environmental resistance |
Enclosure rating |
IP65/IP67 (IEC60529) |
|
Overvoltage category |
II |
|
Ambient temperature |
-10 to 55°C 14 to 131°F, No freezing |
|
Ambient temperature for storage |
-25 to +60°C -13 to 140°F (No freezing) |
|
Relative humidity |
15 to 85% RH (No condensation) |
|
Storage relative humidity |
15 to 95% RH |
|
Operating ambientluminance |
Incandescent lamp: 3,000 lx or less. Sunlight: 20,000 lx or less |
|
Vibration |
10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in the X, Y and Z directions |
|
Shock resistance |
100 m/S2Â (approx. 10 G), 16 ms pulse in X, Y and Z directions, 1,000 times each axis |
|
Material |
Main unit case |
Aluminum |
|
Upper case/lower case |
Nylon (GF 30%) |
|
Front cover |
Polycarbonate, SUS304 |
|
Weight |
Transmitter |
880 g |
|
Receiver |
890 g |
