Product Overview
Acromag 4683 Series: RS485-to-RS485 Network Repeater UL/CSA-4683-TTM-1
Product short description:
Designed for use with Johnson Controls N2 or BACnet MS/TP bus
115V AC ±10%, 50/60 Hz, 0.05A or 230V AC ±10%, 50/60 Hz, 0.03A or 24V AC ±10%, 50/60 Hz, 0.18A typical power
Operating temperature: -25 to 70° C (-13 to 158° F)
4683-TTM-3F: 24V AC Power
Acromag’s RS-485 network repeater device allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities. In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.
Operation is transparent to all devices and no handshaking is required. Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate. Or, for a harsh environment, it can be installed in a NEMA enclosure of your choice. No enclosure is necessary for use in a laboratory or office. Installation requires mounting, connecting power and cables, and setting the baud rate.
Approvals
UL/cUL listed: Energy management equipment
Pre-owned surplus, untested. May show signs of wear from storage or installation. See photos for more details.
xxqxx13
Product short description:
Designed for use with Johnson Controls N2 or BACnet MS/TP bus
115V AC ±10%, 50/60 Hz, 0.05A or 230V AC ±10%, 50/60 Hz, 0.03A or 24V AC ±10%, 50/60 Hz, 0.18A typical power
Operating temperature: -25 to 70° C (-13 to 158° F)
4683-TTM-3F: 24V AC Power
Acromag’s RS-485 network repeater device allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities. In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.
Operation is transparent to all devices and no handshaking is required. Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate. Or, for a harsh environment, it can be installed in a NEMA enclosure of your choice. No enclosure is necessary for use in a laboratory or office. Installation requires mounting, connecting power and cables, and setting the baud rate.
Approvals
UL/cUL listed: Energy management equipment
Pre-owned surplus, untested. May show signs of wear from storage or installation. See photos for more details.
xxqxx13
Powered by SixBit's eCommerce Solution
