Product Overview
ACTi ACD-2100 1-Channel Video Server Security Surveillance Camera
Device:
Product Type: Video Encoder
Maximum Number of Cameras: 1
PTZ:
Pan, Tilt or Zoom protocol: Pelco-D, Pelco-P V1 and V2, Dynacolor, American Dynamics, Visca
Video:
Compression: MPEG-4 SP, MJPEG
Maximum Frame Rate vs. Resolution: 30 fps at 720 x 480, 25 fps at 720 x 576, 30 fps at 352 x 240, 25 fps at 352 x 288, 30 fps at 160 x 112, 25 fps at 176 x 144
Multi-Streaming: Single stream
Bit Rate: 28Kbps - 3Mbps (per stream)
Bit Rate Mode: Constant, Variable
Image Enhancement: Brightness, Saturation, Contrast
Privacy Mask: 1 configurable regions
Text Overlay: Yes
Server-based Analytics Face Detection, Object Based Motion Detection, Tamper, People Counting, Object Line Crossing Detection, Object Enter Area Detection, Exit Area, Appear in Area, Missing Object Detection, Unattended Object Detection, Crowd Detection, Vehicle Counting, Heat Map, Automatic License Plate Recognition, Vehicle Speed Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Audio:
Audio Type: 2-way, Line-in, Line-out
Audio Compression: 8 kHz, Mono, PCM, 16 bit encoding Network Network Protocol & Service: TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port: 1 x RJ-45 connector
Security: IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control
Event:
Event Trigger: Video motion detection (3 regions), External device through digital input, Event Response: Notify control center, Go to PTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Upload video or snapshot to FTP server, Activate external device through digital output
System:
Client PC Operating System: Windows 7, Windows Vista, Windows Server 2003, Windows XP
Integration:
Unified Solution: Fully compatible with ACTi cameras
Software Development Kit: Yes
Web Browser: IE 6.0 or newer
Interface:
Serial Port: 1 x RS-485/RS-422/RS-232
Audio Interface : 3.5mm Phone Jack
Analog Video Input: 1 X CVBS, BNC connector
Analog Video Output: 1 x CVBS, BNC connector
Digital Input/Output: 2/2 (Terminal block)
General:
Power Source: DC 12V
Power Consumption: 3.8 W (DC)
Weight: 350g (0.77lb)
Dimensions (W x H x D): 112mm x 37.2mm x 119mm (4.41" x 1.46" x 4.68")
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Operating Humidity: 10% - 85% RH
Pre-owned condition, see photos for details.
XXQXX10
Device:
Product Type: Video Encoder
Maximum Number of Cameras: 1
PTZ:
Pan, Tilt or Zoom protocol: Pelco-D, Pelco-P V1 and V2, Dynacolor, American Dynamics, Visca
Video:
Compression: MPEG-4 SP, MJPEG
Maximum Frame Rate vs. Resolution: 30 fps at 720 x 480, 25 fps at 720 x 576, 30 fps at 352 x 240, 25 fps at 352 x 288, 30 fps at 160 x 112, 25 fps at 176 x 144
Multi-Streaming: Single stream
Bit Rate: 28Kbps - 3Mbps (per stream)
Bit Rate Mode: Constant, Variable
Image Enhancement: Brightness, Saturation, Contrast
Privacy Mask: 1 configurable regions
Text Overlay: Yes
Server-based Analytics Face Detection, Object Based Motion Detection, Tamper, People Counting, Object Line Crossing Detection, Object Enter Area Detection, Exit Area, Appear in Area, Missing Object Detection, Unattended Object Detection, Crowd Detection, Vehicle Counting, Heat Map, Automatic License Plate Recognition, Vehicle Speed Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Audio:
Audio Type: 2-way, Line-in, Line-out
Audio Compression: 8 kHz, Mono, PCM, 16 bit encoding Network Network Protocol & Service: TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port: 1 x RJ-45 connector
Security: IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control
Event:
Event Trigger: Video motion detection (3 regions), External device through digital input, Event Response: Notify control center, Go to PTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Upload video or snapshot to FTP server, Activate external device through digital output
System:
Client PC Operating System: Windows 7, Windows Vista, Windows Server 2003, Windows XP
Integration:
Unified Solution: Fully compatible with ACTi cameras
Software Development Kit: Yes
Web Browser: IE 6.0 or newer
Interface:
Serial Port: 1 x RS-485/RS-422/RS-232
Audio Interface : 3.5mm Phone Jack
Analog Video Input: 1 X CVBS, BNC connector
Analog Video Output: 1 x CVBS, BNC connector
Digital Input/Output: 2/2 (Terminal block)
General:
Power Source: DC 12V
Power Consumption: 3.8 W (DC)
Weight: 350g (0.77lb)
Dimensions (W x H x D): 112mm x 37.2mm x 119mm (4.41" x 1.46" x 4.68")
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Operating Humidity: 10% - 85% RH
Pre-owned condition, see photos for details.
XXQXX10
Powered by SixBit's eCommerce Solution
