Product Overview
Allen-Bradley 1734-AENT Point I/O Ethernet Dual Port In-Cabinet Network Adaptor
The Allen-Bradley 1734-AENT is a POINT I/O Ethernet I/P communication adapter. This module provides Ethernet connectivity for sending and receiving POINT I/O module information to the master controller. This module has One (1) Ethernet interface, supporting 10/100 Mbits/s, half or full-duplex transmission rate supporting Linear, Star and Tree topology. It is powered by a 24 VDC supply Voltage and mounted to a DIN Rail.
Inrush Current: 6 Amps
Module Type: Ethernet Adapter Module
Part Number/Catalog No.: 1734-AENT
Brand: Allen-Bradley
Product Family:: 1734 POINT I/O
Product Type:: Communications
No. of Ports: 1
I/O Module Capacity: 63 modules
I/O Points, max.: 504
Communication Rate: 10/100 Mbits/s, half or full-duplex.
Supported Topologies: Star / Tree topologies
Indicators: 3 red/green status indicators (on CPU): – Module status – Network status – POINTBus status 1 green status indicator on CPU: – Network activity 2 green power supply status indicators on DC-DC Converter: – System power (5V DC to POINTBus Out) – Field power (24V DC from Field In) Topologies: Star, Tree
Field Side Power: 400 milliamps
Power Consumption: 10.4 W @ 28.8V DC
POINTBus Current: 1000 milliamps
Power Dissipation: 5.2 Watts (at 28.8 Volts)
Series: POINT I/O
Input Voltage Rating: 24 Volts DC
Dimensions: 30 x 2.16 x 5.25 inches
Enclosure Type: Open
Ethernet Connector: RJ-45, Category 5
Wire Size: 3/64 inches insulation max
Chassis Size: 4
Input Overvoltage Protection: Reverse Polarity Protected
Isolation Voltage: 50 Volts (Continuous)
Maximum Expansion I/O Capacity: 63 Modules, 31 Direct Connections
Mounting: DIN rail
New surplus in manufacturers packaging. See photos for details.
XXQXX10
The Allen-Bradley 1734-AENT is a POINT I/O Ethernet I/P communication adapter. This module provides Ethernet connectivity for sending and receiving POINT I/O module information to the master controller. This module has One (1) Ethernet interface, supporting 10/100 Mbits/s, half or full-duplex transmission rate supporting Linear, Star and Tree topology. It is powered by a 24 VDC supply Voltage and mounted to a DIN Rail.
Inrush Current: 6 Amps
Module Type: Ethernet Adapter Module
Part Number/Catalog No.: 1734-AENT
Brand: Allen-Bradley
Product Family:: 1734 POINT I/O
Product Type:: Communications
No. of Ports: 1
I/O Module Capacity: 63 modules
I/O Points, max.: 504
Communication Rate: 10/100 Mbits/s, half or full-duplex.
Supported Topologies: Star / Tree topologies
Indicators: 3 red/green status indicators (on CPU): – Module status – Network status – POINTBus status 1 green status indicator on CPU: – Network activity 2 green power supply status indicators on DC-DC Converter: – System power (5V DC to POINTBus Out) – Field power (24V DC from Field In) Topologies: Star, Tree
Field Side Power: 400 milliamps
Power Consumption: 10.4 W @ 28.8V DC
POINTBus Current: 1000 milliamps
Power Dissipation: 5.2 Watts (at 28.8 Volts)
Series: POINT I/O
Input Voltage Rating: 24 Volts DC
Dimensions: 30 x 2.16 x 5.25 inches
Enclosure Type: Open
Ethernet Connector: RJ-45, Category 5
Wire Size: 3/64 inches insulation max
Chassis Size: 4
Input Overvoltage Protection: Reverse Polarity Protected
Isolation Voltage: 50 Volts (Continuous)
Maximum Expansion I/O Capacity: 63 Modules, 31 Direct Connections
Mounting: DIN rail
New surplus in manufacturers packaging. See photos for details.
XXQXX10
Powered by SixBit's eCommerce Solution
