Product Overview
Beckhoff KL2408 Bus Terminal 8-Channel Digital Output 24VDC/0.5A Reverse Voltage
The KL2408 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. It is protected against reverse polarity connection and handles load currents with outputs that are protected against overload and short-circuit. The Bus Terminal contains eight channels which indicate their signal state by means of light emitting diodes. It is particularly suitable for space-saving use in control cabinets. The connection technology is optimized for single-ended inputs. All components have to use the same reference point as the KL2408. The power contacts are looped through. The outputs are supplied by the 24 V power contact.
Connection technology: 1-wire
Number of outputs: 8
Nominal voltage: 24 V DC (-15%/+20%)
Load type: ohmic, inductive, lamp load
Max. output current: 0.5 A (short-circuit proof) per channel
Short-circuit current: < 2="">
Breaking energy: < 150="">
Reverse voltage protection: yes
Electrical isolation: 500 V (K-bus/field potential)
Current consumption power contacts: typ. 60 mA + load
Current consumption K-bus: typ. 18 mA
Bit width in the process image: 8 outputs
Configuration: no address or configuration setting
Weight approx.: 70 g
Operating temperature: -25…+60°C
Storage temperature: -40…+85°C
Relative humidity: 95%, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/variable
Pluggable wiring: for all KSxxxx Bus Terminals
Approvals/markings: CE, CCC, UL, ATEX, IECEx, DNV GL, cFMus
Ex marking:
ATEX: II 3 G Ex ec IIC T4 Gc
IECEx: Ex ec IIC T4 Gc
cFMus: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, AEx ec IIC T4 Gc
New surplus without manufacturers packaging, see photos for detail.
XXQXX10
The KL2408 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. It is protected against reverse polarity connection and handles load currents with outputs that are protected against overload and short-circuit. The Bus Terminal contains eight channels which indicate their signal state by means of light emitting diodes. It is particularly suitable for space-saving use in control cabinets. The connection technology is optimized for single-ended inputs. All components have to use the same reference point as the KL2408. The power contacts are looped through. The outputs are supplied by the 24 V power contact.
Connection technology: 1-wire
Number of outputs: 8
Nominal voltage: 24 V DC (-15%/+20%)
Load type: ohmic, inductive, lamp load
Max. output current: 0.5 A (short-circuit proof) per channel
Short-circuit current: < 2="">
Breaking energy: < 150="">
Reverse voltage protection: yes
Electrical isolation: 500 V (K-bus/field potential)
Current consumption power contacts: typ. 60 mA + load
Current consumption K-bus: typ. 18 mA
Bit width in the process image: 8 outputs
Configuration: no address or configuration setting
Weight approx.: 70 g
Operating temperature: -25…+60°C
Storage temperature: -40…+85°C
Relative humidity: 95%, no condensation
Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.: IP20/variable
Pluggable wiring: for all KSxxxx Bus Terminals
Approvals/markings: CE, CCC, UL, ATEX, IECEx, DNV GL, cFMus
Ex marking:
ATEX: II 3 G Ex ec IIC T4 Gc
IECEx: Ex ec IIC T4 Gc
cFMus: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, AEx ec IIC T4 Gc
New surplus without manufacturers packaging, see photos for detail.
XXQXX10
Powered by SixBit's eCommerce Solution
