Product Overview
HEYCO 1/2" NPT Liquid Tight 90° Sweep Conduit Fitting PN 8425
Fits Conduit/Tubing Trade Size: 1/2"
Part No.: 8425
Description: HFC 1/2-90R
Thread Size: 1/2"
Clearance Hole: .875 (22.2 mm)
Max O. A. Height: 1.982" (50.3 mm)
Max O. A. Length: 2.912" (73.9 mm)
Thread Length: .520"
-Smooth internal surfaces for easier wire installation around corner angles.
-Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification and testing.
-No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
-No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
-Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
-Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
New surplus, see photos for details.
XXQXX10
Fits Conduit/Tubing Trade Size: 1/2"
Part No.: 8425
Description: HFC 1/2-90R
Thread Size: 1/2"
Clearance Hole: .875 (22.2 mm)
Max O. A. Height: 1.982" (50.3 mm)
Max O. A. Length: 2.912" (73.9 mm)
Thread Length: .520"
-Smooth internal surfaces for easier wire installation around corner angles.
-Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification and testing.
-No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
-No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
-Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
-Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
New surplus, see photos for details.
XXQXX10
Powered by SixBit's eCommerce Solution
