Product Overview
Originally acquired as a Val-co high pressure water pump fogger/ mister air bone particle suppression system. Can be used for Reverse Osmosis filtration system, saltwater filtration, or industrial misting/fogging set up.
- Baldor Motor
General Specifications:
-Model: M3611T
-Enclosure: TEFC
-Frame 182T
-Frame Material: Steel
-Frequency: 60.00 Hz
-Output @ Frequency: 3.000 HPÂ @ 60 HZ
-Phase: 3
-Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
-Voltage: 46.0 V @ 60HZ, 230.0 V @ 60 HZ, 208.0 V @ 60 HZ
-Ambient Temperature: 40 C
-Base Indicator: Rigid
-Current @ Voltage: 4.2 A @ 460.0V, 8.4A @ 230.0V, 9.1A @ 208.0 VÂ Â
-Efficiency @ 100% Load: 87.5%
-High Voltage Full-Load Amps: 4.2a
-Insulation Class: F
-KVA Code: L
-Motor Lead Termination: Flying Leads
-Motor Lead Quantity/ Wire Size: 9 @ 18 AWG
-Motor Type: 3542MÂ
-Pulley End Bearing Type: Ball
-Speed: 1750 rpm
-Motor Standards:Â NEMA
-Starting Method: Direct on line
-EZ Series 44 E, 2500 PSI, Triplex Plunger Pump
Features:
-Solid ceramic plungersÂ
-NEMA 184C mounting flange
-Forged brass manifold and 4:1 hydrostatic rating
-Die-cast, anodized aluminum, oil-bath crankcase
-Premium roller bearing
-Unitized stainless steel inlet and discharge valves
Specifications:
-Pump Model: EZ2542E
-Maximum Volume: 4.2 GPM
-Maximum Discharge Pressure: 2500 PSI
-Maximum Pump Speed: 1750 RPM
-Maximum Inlet Pressure: 125PSI
-Maximum Inlet Vacuum: 3 ft. water Z(2.6 in. Hg)
-Bore: .708 in. / 18 mm
-Stroke (in/mm): .708 in. /18 mm
-Crankcase Oil Capacity: 14.0 oz.
-Maximum Fluid Temperature: 165F
-Inlet Port Thread: 1/2-14 BSPP-F
-Discharge Port Thread: 3/8-19 BSPP-F
-Hollow Shaft I.D.: 1.125 in/28.5 mmÂ
-Barksdale Econ-O-Trol E1H-H15Â Â Pressure Actuated Switch Dia-Seal Piston Design
General Specifications:
-Accuracy: +2% of the adjustable range
-Switch: Type, Single pole double throw (SPDT) snap action; single circuit
-Rating: Class H limit switch: 10 amps @ 125/250 VAC; 3 amps @ 480 VAC; 0.5 amps @ 24 VDC
-Wetted Parts: Process Fitting, Anodized aluminum (standard)
-Seals & Diaphragms: Buna-N (standard)
-Enclosure: Anodized aluminum (housing models)
-Electrical Connection:Â 1/2" NPT female conduit connection
-Temperature Range: Operating, -20 to +165F (-29 to +74C)
Parker 2-Way Normally Closed, 1/4" NPT General Purpose Solenoid Valves
General Specifications:
-Provides operating pressures up to 600PSI and flow factors up to 2.5 CV's.
-Part Number #: 71215SN2GV00N0D100B2
-Voltage (V): 24/60
-Body Material: Stainless
-Seal Material: FKM
-Orifice 1 Size (INCH): 1/16
-Flow Factor 1 (CV): 0.1
-Power (WATTS): 10 Watts (AC)
-Coil Type: DIN Form A
-Product Series: 7000 Series
-Valve Type: 2-Way
-Function: Normally Closed
-Port Size: 1/4"Â
-Maximum Pressure Differential: 350psi (AC) psi
-Number of Ports: 2
-Actuation Type: Direct Acting
-Media: General Purpose for Air, Liquids and Gases
-Port Type: NPT
-Maximum Fluid Temperature: 185F
-Coil Specifications Met: NEMA 4X
Paraplate Regulator
General Specifications:
- 750-2000 PSI
- 5 gpm
- 3/8 Inlet
- 1/4 Outlet
- Repeatable Setting
- Temperature up to 250F/ 121C
- Para pPate Model #BR52
Pre-owned condition. Untested equipment.
XXQXX11

Powered by SixBit's eCommerce Solution