Product Overview
RTI Crimp Series Connectors RTS00-37P-090 37 Pin Box Mount Receptacle
The RTS Crimp Series (Commercial) exceeds the Mil-C-81703 Series I and RT Solder Series lines in performance. This line will intermate with the corresponding layouts in the Mil-C-81 703 Series I line and the RT Solder Series line. This line is used in more critical applications where the environment and voltage ratings are a factor.
All parts designed, manufactured and tested to meet the following specs:
Air Leakage: Less than 1 cu. in/hr @ 30 psi diff
Altitude: 1250 volts (rms) 60 cps @ 50,000 ft. (mated)
Corrosion: Meets requirements of Mil-STD-202A, Method 101, Condition B.
Contact Spacing: Minimum contact spacing (center to center): #20 - .130 / #16 - .168 / #12 - .205
Contact Retention: Withstand 25 lbs minimum, in either direction
Current: #20 contact - 7.5 amps / #16 contacts - 25 amps / #12 contact - 40 amps.
Durability: 500 cycles of engagement without defects.
Humidity: Meets requirements for Mil-E-5272 procedures I & III.
Insulation Resistance: 50,000 megohms minimum @ 75°F.
Temperature Rating: Operating temperatures from -67°F to over 300°F.
New surplus. Obtained from a facility that required individual unit testing. Item may show signs of mounting/testing, but is in otherwise new condition. Pins not included. See photos for details.
xxqxx13
The RTS Crimp Series (Commercial) exceeds the Mil-C-81703 Series I and RT Solder Series lines in performance. This line will intermate with the corresponding layouts in the Mil-C-81 703 Series I line and the RT Solder Series line. This line is used in more critical applications where the environment and voltage ratings are a factor.
All parts designed, manufactured and tested to meet the following specs:
Air Leakage: Less than 1 cu. in/hr @ 30 psi diff
Altitude: 1250 volts (rms) 60 cps @ 50,000 ft. (mated)
Corrosion: Meets requirements of Mil-STD-202A, Method 101, Condition B.
Contact Spacing: Minimum contact spacing (center to center): #20 - .130 / #16 - .168 / #12 - .205
Contact Retention: Withstand 25 lbs minimum, in either direction
Current: #20 contact - 7.5 amps / #16 contacts - 25 amps / #12 contact - 40 amps.
Durability: 500 cycles of engagement without defects.
Humidity: Meets requirements for Mil-E-5272 procedures I & III.
Insulation Resistance: 50,000 megohms minimum @ 75°F.
Temperature Rating: Operating temperatures from -67°F to over 300°F.
New surplus. Obtained from a facility that required individual unit testing. Item may show signs of mounting/testing, but is in otherwise new condition. Pins not included. See photos for details.
xxqxx13
Powered by SixBit's eCommerce Solution
